BACK

Combined with the CU200 pump control unit, the level switch acts as a pump cut-out function when the storage tank is full.

The CU200 offers indication of:

• full water reservoir (level switch activated
• pump operation
• instantaneous input power
• dry running
• service required
• insufficient energy supply

Typical SQ Flex Solar system configuration

 

	1 - SQF pump
	2 - Pump cable
	3 - Cable clips securing cable
	4 - Safety rope
	5 - Wire clamp
	6 - Solar array
	7 - Solar array support structure
	12 - IO 100 switch box

IO 100 A very simple and easy-to-use system and with cable interface. Controlled by a manual on/off switch.

GF43 SOLAR MODULE Specifically designed to power the SQFlex system, the GF43 produces a high DC voltage of 140VDC, reducing losses through cables and providing peak efficiency for the SQFlex pump. Each GF43 is capable of producing 43 watts of peak power and is designed to be connected in parallel with other GF43's. This allows the SQFlex system to be optimized to your location & water requirements.