ST 130 Series surface mount fluorescent fixtures

The ST 130 series are economically priced, practical lights that feature prepainted aluminum housings and acrylic diffuser lenses. They are available as large as four feet long with two standard 32 watt AC fluorescent tubes to meet maximum lighting requirements. Where practicality is the principal consideration, the ST 130 series suit the requirement perfectly.

Model 130

16 watt 12VDC light 12" x 5 3/8” x 1¾". 1.5 amps.Uses two FST5/CW fluorescent tubes. 800 design lumens.

Model 134

30 watt 12VDC light. 18" x 5 3/8” x 1 3/8”. 2.2 amps. Uses two F15T8/CW fluorescent tubes. 1650 design lumens.

Model 137

18 watt 12VDC light. 24" x 5 3/8” x 1¾". 1.4 amps, Uses one F24"T8/CW fluorescent tube. 1225 design lumens.

Model 138

36 watt 12VDC light. 24" x 5 3/8" x 1¾". 2.8 amps. Uses two F24"T8/CW fluorescent tubes. 2450 design lumens.

Model 139

32 watt 12VDC light. 48" x 5 3/8" x 1¾ ”. 2.4 amps. Uses one F32T8/CW fluorescent tube. 2850 design lumens

160 Series weatherproof outdoor area lights

Thin-Lite weatherproof outdoor area lights feature anodized aluminum housings. They provide superior nighttime security and area lighting. When attached to the rear of a vehicle, they provide clear visibility for parking, hitching and backing up. They offer the option of energy efficient outdoor area and security lighting for remote sites where standard grid power is unavailable. An amber diffuser lens is standard (will not attract night flying insects). Clear lens optional.

Model 161

8 watt 12VDC light. 12½" x 3¾" x 2¾" 0.9 amps. Uses one FST5 / CW fluorescent tube. 400 design lumens.

Model 162

16 watt 12VDC light. 12½" x 3 ¾" x 2 ¾" 1.5 amps. Uses two FST5/CW fluorescent tubes. 800 design lumens.

Model 163

15 watt 12VDC light. 18½" x 3 ¾" x 2 ¾" 1.3 amps. Uses one F15T8/CW fluorescent tube. 870 design lumens.

Model 167

30 watt 12VDC light. 36½” x 3¾” x 2¾”. 2.1 amps. Uses one F30T8/CW fluorescent tube. 2200 Design lumens.

180 Series commercial and industrial fixtures

Thin-Lite commercial, industrial and residential surface mount fluorescents are designed for practical applications where decorative styling is desirable. The 180 series feature anodized aluminum housings and clear diffuser lenses for maximum light output. They are designed for remote switching.

Model 181

20 watt 12VDC light. 24" x 3 5/8" x 3½" deep. 1.6 amps. Uses one F20712/CW fluorescent tube. 1250 design lumens.

Model 183

32 watt 12VCD light. 48" x 3 5/8" x 3½ deep . 2.4 amps. Uses one F32TS/CW fluorescent tube. 2850 design lumens.

ST 100 Series indirect strip fluorescent fixture

The ST 100 series strip lights are practical and economically priced. They are designed for indirect lighting, mounted in headliners and behind valances. They feature basic aluminum housings and are shipped complete with fluorescent tubes, less switch and diffuser lens.

Model 101

8 watt 12VDC light. 17¾" x 2 1/8” x 1¼ ". 0.9 amps. Uses one F8T5/CW fluorescent tube. 400 design lumens.

Model 103

15watt 12VDC light. 23 3/8" x 2 1/8” x 1 5/8 ". 1.9 amps. Uses one F15T5/CW fluorescent tube. 870 design lumens.

190 Series Fluorescent light fixtures, hi-tech styles

Hi-tech light fixtures were developed for both efficient and attractive lighting where maximum light is required. Anodized aluminum housings and clear acrylic diffuser lenses provide high light output on three sides. They are designed for commercial and industrial vehicles, and for use in remote area housing, schools and medical facilities in conjunction with alternative sources of energy. Almond end caps standard. Black end caps optional at no additional charge.

Model 191

8 watt 12VDC light. 12½" x 2 3/8" x 2½". 0.9 amps. Uses one F8T5/CW fluorescent tube. 400 design lumens.

Model 193

15 watt 12VDC light. 18¼" x 2 3/8" x 2½". 1.3 amps. Uses one F15T8/CW fluorescent tube. 870 design lumens.

Model 195

18 watt 12VDC light. 24¼" x 2 3/8" x 2½". 1.5 amps. Uses one F24"T8/CW fluorescent tube. 1225 design lumens.

Model 197

30 watt 12VDC light. 36¼" x 2 3/8" x 2½". 2.1 amps. Uses one F30TI8/CW fluorescent tube. 2200 design lumens.

Model 199

6 watt 12VDC light. 9½" x 2 3/8" x 2½". 0.5 amps. Uses one F6T5/CW fluorescent tube. 295 design lumens.

190 Series heavy duty fluorescent light fixtures, commercial and industrial

Heavy duty light fixtures feature clear acrylic diffuser lenses that lock securely into the anodized aluminum housings. They are designed for heavy use service vehicles such as industrial supply trucks, emergency vehicles and mobile kitchens. The fixture design is compatible with the 190 single tube series. Almond end caps standard. Black end caps optional at no additional charge

Model 192

16 watt 12VDC light. 12½" x 5 5/8" x 1 5/8". 1.5 amps. Uses two F8T5/CW fluorescent tubes. 800 design lumens.

Model 194

30 watt 12VDC light. 18¼" x 5 5/8" x 1 5/8". 2.1 amps. Uses two F15T8/CW fluorescent tubes. 1740 design lumens.

700 Series recessed fluorescent light fixtures

Recessed light fixtures provide efficient lighting for elegant interiors. Designed specifically for OEMs, they are easy to install in ceilings and under cabinets. They provide the "custom made" look in either the anodized aluminum or anodized gold housings. Injection molded acrylic diffuser lenses add the finishing touch. Minimum recessed depth required 15/16”

Model 716

30 watt 12VDC light. Suggested mounting opening: 20¼" x 5 5/16” x 1¼". Overall dimensions: 20 5/8" x 6 5/8" x 2". 2.1 amps. Uses two F15T8/CW fluorescent tubes. 1740 design lumens. Also available in almond and gold anodized.