Provides 2000 watts of true sine wave AC power from a DC source and 100-amp multistage battery charging

A powerful all-in-one solution, Prosine 2.0 inverter/chargers (part#805-2000 – hardwire version) deliver up to 2000 watts of unsurpassed clean true sine wave output power and combines this with a 100 amp, multistage battery charger. Series stackability allows for two units to power 240 VAC applications such as power tools, over ranges, washer/dryer combinations and air conditioners. The Prosine 2.0 is ideal for upgrading your electrical system in a boat, RV, or utility vehicle, for building a standby power system for critical equipment or incorporating an alternative energy system for a remote home. The system includes a full function LCD remote control panel and battery temperature sensor.

Electrical Specifications - Inverter

Output power continuous              2000 watts

Surge rating (5 sec.)                    4.5 kW

Output current (continuous)          17 A RMS

                                                50 A peak

Output voltage                            117 VAC RMS

Output frequency*                       60 Hz +/-0.05%

(*crystal controlled)

Output waveform                         True sine wave

                                                <2% THD typical

Efficiency (full load)                      87%

Peak efficiency                            89%

No load power draw (inverting)       <25 W

No load power draw*                     <2 W

(*search mode, 3 s interval)

Input DC voltage range                  10 - 16 VDC

Electrical Specifications - Charger

Output current (continuous)          100 A DC

Output voltage                            12 VDC nominal

Output voltage range                    0 - 17.5 V

Charge control                             3 stage with

                                                manual equalize

Charge temp compensation            Remote battery

                                                sensor

Efficiency                                   81% typical

AC input power factor                   0.99

Input current (for 100 A charging)  15 A RMS nominal

Input AC voltage                         120 VAC nominal

Input AC voltage range                 90 - 135 VAC

General Specifications

Compatible battery types              Flooded/gel/

                                                AGM/Pb-Ca

Transfer relay rating                     30 A, 1.5 HP,

                                                120 VAC

Transfer time*                             16 ms typical

(*AC to inverter and inverter to AC)

Storage ambient temp range          -40°F - 158°F

                                                40°C - 70°C

Optimal operating temp range         32°F - 104°F

                                                0°C - 40°C

Operating ambient temp range        -4°F - 140°F

(*derated above 40°C)                 -20°C - 60°C*

Dimensions (HxWxD)                     17.7x11.2x5.7”

                                                450x285x145 mm

Weight                                       24.0 lb (11 kg)

Warranty                                    2 years

Part numbers                               805-2000 (HW)

                                                805-2020 (GFCI)

                                                808-2000 

                                                (DC wiring box)

Regulatory Approvals

CSA/NRTL certified to CSA 107.1, UL 458 (including Marine supplement) and UL 1741 standards

FCC Class B / Industry Canada Class B

KKK-A-1822D compliant, for use in “Star-of-Life” ambulances (GFCI version)

ABCY compliant, recommended practices E-8, E-9, A-20, and A-25 for marine use