 |
 |
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Contact
us for a FREE quotation by phone, fax or e-mail |
|
|
|
|
| Quick Product
List |
|
| |
|
|
|
|
|
 |
|
 Power
Panels are Xantrex's first packaged power system. They are
less expensive than an on-site component installation and
meet many power application needs. To install a Power Panel,
simply connect them to the battery, PV and or AC loads, Power
Panels include inverters and are assembled by Xantrex with
components specified by the dealer or customer.
Included in all Power Panel Systems:
- Powder-coated steel backplate prewired with all NEC / UL
required AC & DC overcurrent protection and disconnects
(only for indoor installation). Simply connect to the battery
and AC loads and your system is operational.
- Can be used with wind, solar, or hydro DC charging sources
- 60 amp AC system bypass that allows inverter servicing while
keeping AC loads connected to the grid or generator
- ETL
listed components and enclosure
- Negative/ground bonding block
Options
- Optional nonmetallic battery enclosure which doubles as a
shipping enclosure
- Single or dual C40 Charge controllers for solar, wind, hydro
DC charging sources
- Flexible conduit for connection of the system to the battery
enclosure
- One or two Trace™ SW or DR inverters
SW Series Power Panels
- Sine wave AC power inverter with high-efficiency, bidirectional
operation
- Up to 11 kW of continuous AC power
- Up to 60 amps of AC input from a generator or utility grid
- Three-stage, temperature-compensated battery charging
(up to 300A @ 12VDC, 240A @ 24 VDC, and 150A @ 48 VDC)
- Utility-interactive and generator-support operating modes
- Able to regulate up to 4.8 kW of power from solar or other
DC charging sources
- Available outputs of 105, 120, 230 or 120/240 vac at 50 or
60 Hz.
- Available for a 12, 24 or 48-volt DC system
DR Series Power Panels
- Modified sine wave AC power inverter with high-efficiency
operation and battery charging ability
- Up to 7.2 kW of continuous AC power (120/240 vac systems)
- 30 amps of AC pass through power at 120 or 120/240 vac from
a generator or utility grid to your loads, in addition to
the charger draw
- Three-stage, temperature-compensated battery charging - up
to 240A @ 12 VDC or 140A @ 24 VDC
- Able to regulate up to 2.4 kW of power from solar or other
DC charging sources
- Available outputs of 105, 120, 230 or 120/240 vac at 50 or
60 Hz
- Available for 12 or 24-volt DC system
|
SW
Series Power Panel Systems
The SW Power Panel system comes ready for installation,
pre-wired with the following:
- SW Series sinewave AC power inverter
with high efficiency and bi-directional operation,
includes:
- 60 amp AC pass-thru power at 120 VAC (/S=Single
System) or 120/240 VAC (/D=Dual System)
- Adjustable three stage, temperature compensated
battery charging
- 175 or 250 amp DC disconnect breaker*
- 60 amp AC disconnect/bypass breaker in
box*
- AC and DC wiring in conduit (battery
cables not included)*
- Powder coated steel back-plate (40" H
x 43" W x 1" D)
- Battery Temperature Sensor*
- Inverter Conduit Box*
- Negative/Ground Bonding Block
- 500 amp/50 mV shunt (for remote metering)
*These items are doubled on /D (Dual=two inverters) systems
|
| Part No. |
Inverter(s)
|
Power
|
DC Inpute
|
Min Cable**
|
VAC Output
|
Charger
|
| PP-SW4024S |
SW4024
|
4.0 KW
|
24 VDC
|
4/0 AWG
|
120 @ 60 hz
|
120 amps
|
| PP-SW4024/D |
SW4024 x 2
|
8.0 KW
|
24 VDC
|
4/0 AWG x 2
|
120/240 @ 60 hz
|
120 amps x 2
|
| PP-SW3024E/S |
SW3024E
|
3.3 KW
|
24 VDC
|
4/0 AWG
|
230 @ 50 hz
|
100 amps
|
| PP-SW3048E/S |
SW3048E
|
3.3 KW
|
48 VDC
|
2/0 AWG
|
230 @ 50 hz
|
50 amps
|
| PP-SW4048/S |
SW4048
|
4.0 KW
|
48 VDC
|
2/0 AWG
|
120 @ 60 hz
|
60 amps
|
| PP-SW4048/D |
SW4048 x 2
|
8.0 KW
|
48 VDC
|
2/0 AWG x 2
|
120/240 @ 60 hz
|
60 amps x 2
|
| PP-SW4548E/S |
SW4548E
|
4.5 KW
|
48 VDC
|
2/0 AWG
|
230 @ 50 hz
|
57 amps
|
| PP-SW5548/S |
SW5548
|
5.5 KW
|
48 VDC
|
4/0 AWG
|
120 @ 60 hz
|
70 amps
|
| PP-SW5548/D |
SW5548 x 2
|
11.0 KW
|
48 VDC
|
4/0 AWG x 2
|
120/240 @ 60 hz
|
70 amps x 2
|
|
DR
Series Power Panel Systems
The DR Power Panel system comes ready for installation,
pre-wired with the following:
- DR Series modified sinewave AC power
inverter with high efficiency operation, includes:
- 30 amp AC pass-thru power at 120 VAC (/S=Single
System) or 120/240 VAC (/D=Dual System)
- Adjustable three stage, temperature compensated
battery charging
- 175 or 250 amp DC disconnect breaker*
- 60 amp AC disconnect/bypass breaker in
box*
- AC and DC wiring in conduit (battery
cables not included)*
- Powder coated steel back-plate (40" H
x 43" W x 1" D)
- Battery Temperature Sensor*
- Inverter Conduit Box*
- Negative/Ground Bonding Block
- 500 amp/50 mV shunt (for remote metering)
*These items are doubled on /D (Dual=two inverters) systems
|
| Part No. |
Inverter(s)
|
Power
|
DC Input
|
Min Cable**
|
VAC Output
|
Charger
|
| PP-DR1512/S |
DR1512
|
1.5 KW
|
12 VDC
|
2/0 AWG
|
120 @ 60 hz
|
70 amps
|
| PP-DR1512/D |
DR1512 x 2
|
3.0 KW
|
12 VDC
|
2/0 AWG x 2
|
120/240 @ 60 hz
|
70 amps x 2
|
| PP-DR1512E/S |
DR1512E
|
1.5 KW
|
12 VDC
|
2/0 AWG
|
230 @ 50 hz
|
70 amps
|
| PP-DR1524/S |
DR1524
|
1.5 KW
|
24 VDC
|
2/0 AWG
|
120 @ 60 hz
|
35 amps
|
| PP-DR1524/D |
DR1524 x 2
|
3.0 KW
|
24 VDC
|
2/0 AWG x 2
|
120/240 @ 60 hz
|
35 amps x 2
|
| PP-DR1524E/S |
DR1524E
|
1.5 KW
|
24 VDC
|
2/0 AWG
|
230 @ 50 hz
|
35 amps
|
| PP-DR2412/S |
DR2412
|
2.4 KW
|
12 VDC
|
4/0 AWG
|
120 @ 60 hz
|
120 amps
|
| PP-DR2412/D |
DR2412 x 2
|
4.8 KW
|
12 VDC
|
4/0 AWG x 2
|
120/240 @ 60 hz
|
120 amps x 2
|
| PP-DR2424/S |
DR2424
|
2.4 KW
|
24 VDC
|
2/0 AWG
|
120 @ 60 hz
|
70 amps
|
| PP-DR2424/D |
DR2424 x 2
|
4.8 KW
|
24 VDC
|
2/0 AWG x 2
|
120/240 @ 60 hz
|
70 amps x 2
|
| PP-DR2424E/S |
DR2424E
|
2.4 KW
|
24 VDC
|
2/0 AWG
|
230 @ 50 hz
|
70 amps
|
| PP-DR3624/S |
DR3624
|
3.6 KW
|
24 VDC
|
4/0 AWG
|
120 @ 60 hz
|
70 amps
|
| PP-DR3624/D |
DR3624 x 2
|
7.2 KW
|
24 VDC
|
4/0 AWG x 2
|
120/240 @ 60 Hz
|
70 amps x 2
|
|
Power
Panel Options
Several options are available pre-installed** with wiring,
conduit and fittings onto the Power Panel.
Note: These options are only available when ordered on the
same purchase order as the Power Panel
|
| Part
Nr. |
Description |
| PPO-C40 |
C40 DC charge
or load controller installed, includes pre-wired 60 amp
DC breaker |
| PPO-DVM/C40 |
Digital meter
with LCD display installed on the front of the C40 |
| PPO-CD15 |
15 amp DC load
breaker pre-wired and installed in the DC disonnect |
| PPO-CD20 |
20 amp DC load
breaker pre-wired and installed in the DC disconnect |
| PPO-CD60 |
60 amp DC load
breaker pre-wired and installed in the DC disconnect |
| PPO-BC5-2/0 |
5 foot 2/0 AWG
battery cable pair with ring terminals (battery side only)
and flexible conduit |
| PPO-BC10-2/0 |
10 foot 20 AWG
battery cable pair with ring terminals (battery side only)
and flexible conduit |
| PPO-BC5-4/0 |
5 foot 4/0 AWG
battery cable pair with ring terminals (battery side only)
and flexible conduit |
| PPO-BC10-4/0 |
10 foot 4/0 AWG
battery cable pair with ring terminals (battery side only)
and flexible conduit. |
| PPO-BC15-4/0 |
15 foot 4/0 AWG
battery cable pair with ring terminals (battery side only)
and flexible conduit |
| PPO-SB |
Heavy duty plastic
shipping container, excellent for making a battery box
(ID: 24"H X 46"L X 42"W) |
| Dual Power Panel systems (/D)
require two battery cable pair. Total battery cable length
that is usable is 1 foot less than the length ordered
due to 1 foot required in the DC disconnect (i.e. PPO-BC5-2/0
is 5 feet long one-way, but 4 feet usable to the battery
bank). |
| **Battery cables are offered
only as an option and are not pre-installed on the Power
Panel. |
|
|
|
|
|
|
| |
|
Contact SWPV any time
for more information, quotations or consultation |
|
|
|
|
|
|
Copyright
© 2003, Southwest Photovoltaic Systems, Inc. |
|
|
|
|
|
