NON-SPILLABLE
by DOT (Department of Transportation) ICAO (International
Commercial
Airline Organization) and IATA (International Airline
Transport Association) definitions
Advanced American Technology and the use of the most
modern computer-aided design and manufacturing techniques
combine to make MK Battery's Sealed Batteries the standard
by which all other batteries are judged.
Major Benefits of a MK Gel Battery
Completely maintenance free. Sealed construction eliminates
periodic watering, corrosive acid fumes and spills.
Electrolyte will not stratify, no equalization charging
required. Allows faster recharge.
Increases durability and deep cycle ability for heavy
demand applications.
Less than 2% per month stand loss means little deterioration
during transport and storage.
Tank formation ensures voltage matching between cells.
Transports easily and safely by air. No special containers
needed
Ensures reliable service, support and quality.
Gelled
electrolyte formula
Gelled
electrolyte won’t spill, even if the battery is tipped
upside down or cracked open. Therefore, you don’t have
to worry about messy acid spills or corrosion around
the battery or sensitive equipment.
Computerized
gel mixing
Proper
gel mixing is absolutely critical to battery life and
performance. Inconsistent mixing means inconsistent life
and performance. Sophisticated computer controls and a
unique temperature-controlled process assures superior
gel consistency.
Multi-stage
filling
Other
manufacturers fill their gel batteries in a single step
process using vibration to attempt to drive out air pockets.
This system leaves voids and forms dead spots on the battery
plates, reducing performance. The MK batteries are manufactured
using a multi-stage vacuum process which completely eliminates
these power robbing dead spots by vacuuming each cell
several times. This multi-step process assures peak performance
of the battery plates.
Tank
formed plates
The
power producing battery plates are charged or ‘formed’
outside of the battery in an exclusive and unique tank
formation process. This slower and more expensive process
allows inspections of every plate after charging to be
certain it is of the highest quality and completely formed
before they are used in the battery. Others do not take
this extra step and do not have this extra opportunity
to assure that only the highest quality plates are used
in their batteries.
Calcium
/ Copper lead alloy plates
The
lead alloy that is used to make the MK battery actually
perform better than the competition. This special lead
alloy provides the benefits of lower self-discharge for
better off-season storage, more power-per-pound of battery
for more cranking amps and longer deep cycle running time
and superior corrosion resistance for longer battery life.
Weld
seals
All
critical intercell weld are sealed inside the battery.
This feature dramatically reduces self-discharge which
increases off-season storage time. This means that if
you recharge your battery before storage, it will be ready
to start or run when you are raedy the next season.
Over
250 quality checks
One
of the reasons that MK batteries can make these claims
is because of all of the quality control checks and balances
that are performed. Every single raw material and component
that goes into the MK battery is sampled or checked to
assure the user that the battery is the finest made.
Contact SWPV any time
for more information, quotations or consultation
Commercial
Airline Organization) and IATA (International Airline
Transport Association) definitions
Completely maintenance free. Sealed construction eliminates
periodic watering, corrosive acid fumes and spills. 
